Deals
0
Cart
Solid State Lasers and Laser Diodes from RPMC Lasers Inc » Products » 30.0

30uJ Lasers

Unlike continuous wave lasers, the output of these 30uJ pulsed lasers cannot be specified by their output power alone. This is because the output power of a pulsed laser is determined by three different parameters, the laser’s pulse width, pulse energy, and pulse repetition rate.

On this page, we have a list of all of the 30uJ lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Talk to a Product Manager

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Manufacturer

more more
Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
DIADEM Series Diadem IR Pulsed DPSS Lasers, Ultrafast Lasers 1030, 1064 10.0, 20.0, 30.0 10.0, 20.0, 30.0, 40.0 400fs, 10ps Single shot to 2MHz Active
Bright Microlaser Microchip SB1 Laser SB1-1064 Pulsed DPSS Lasers, Microchip Lasers 1064 0.008, 0.012, 0.040, 0.110, 0.150, 0.200, 0.225, 0.400 2.0, 15.0, 20.0, 30.0, 40.0, 60.0, 80.0 400ps, 1.3ns 100Hz, 200Hz, 1kHz, 5kHz, 10kHz, 15kHz, 55kHz, 100kHz Passive
Bright Microlaser Microchip SB1 Laser SB1-532 Pulsed DPSS Lasers, Microchip Lasers 532 0.004, 0.006, 0.010, 0.017, 0.020, 0.030, 0.040, 0.075, 0.100 0.300, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 400ps, 1.3ns 10Hz, 100Hz, 200Hz, 1kHz, 5kHz, 10kHz, 15kHz, 55kHz, 100kHz Passive
Wedge-F-532 Wedge-HF/XF 532 Pulsed DPSS Lasers 532 0.500, 1.5, 2.0, 4.0 30.0, 40.0, 80.0, 120.0 400ps - 1ns, 500ps - 1.5ns, 750ps - 2ns, 750ps - 2.5ns 10kHz to 100kHz, Single shot to 10kHz Active
more more

Diadem Series

DIADEM Series

DIADEM Series is a compact, air-cooled, high energy ultrafast laser for advanced micro-machining applications that require short femtosecond pulse widths. The Diadem is available with up to 40µJ of pulse energy, 30W of average power, and operation up to 1MHz (standard), with pulses below <400 fs and an M² < 1.2. This laser has been specifically designed for demanding medical implantable device and electronics manufacturing as well as high peak power optogenetics applications.

Microchip Series

Bright Microlaser Microchip SB1 Laser

The Microchip Series, from BrightMicroLaser, are ultra-compact, passively q-switched, single longitudinal mode (SLM), narrow linewidth, DPSS lasers that feature pulse durations from 350 ps to 3 ns, energy levels up to 100 uJ and repetition rates up to 100 kHz. In addition to the fundamental 1064 nm wavelength and its harmonics (532, 355 and 266 nm), we also deliver units emitting at 946 and 473 nm.

Wedge Series

Wedge-XF-1064: 1064nm Picosecond Laser

The Wedge series of DPSS Lasers have been designed for OEM applications like micro machining of hard and soft materials, specialty marking, glass and crystals engraving, LIDAR, LIBS, Spectroscopy and medical diagnostics. High peak powers, with relatively low energy and heat generation, allows efficient ablation and non-linear interaction with most materials. The compact and lightweight package represents a great benefit in LIDAR and other aerospace applications, while short pulses give extremely precise time-of-flight measurements.
Second Harmonic (532 nm output) and wavelength conversion option widen the product application range.