Lasers that designate 20W of output power can have either CW (continuous wave) or pulsed output. CW Lasers are always defined in average output power. Pulsed Lasers with an output power defined in Watts or Milliwatts usually define the laser’s average power, not the peak power of the laser.
The ALTAIR is an ideal solution for biophotonics applications such as multiphoton microscopy where deep excitation of red-shifted indicators such as RCaMP, dtTomato, and MCherry is required. Providing <160fs pulses, average power up to 20W and peak power up to 1.5MW at 1µm, the ALTAIR is the preferred solution for both OEM and researchers in the microscopy and lifesciences fields. The fiber-based design ensures robust and reliable 24/7 operation while providing supreme pulse quality from a user friendly, ultra compact air-cooled package.
ANTARES is a picosecond, quasi-continuous wave laser with a high repetition rate up to 80 MHz and a narrow linewidth, in a very compact and robust format. This laser series offers average powers of 1 to 40W at 1030 nm or 1064 nm (upon request) and can be doubled or tripled in the harmonics to answer even the most challenging industrial and scientific applications. ANTARES is ideally suited for applications such as CARS and spectroscopy applications.
Areté has developed a commercial series of compact and efficient DPSS laser sources, capable of operating over a wide range of pulsing conditions (duty-cycle and PRF), in a low SWaP package, with average power up to ≈5W @ 266nm, 10W @ 355nm or 532nm, 20W @ 1064nm, suitable for airborne applications. The design has been tested in brassboard hardware and a prototype is being developed.
DIADEM Series is a compact, air-cooled, high energy ultrafast laser for advanced micro-machining applications that require short femtosecond pulse widths. The Diadem is available with up to 40µJ of pulse energy, 30W of average power, and operation up to 1MHz (standard), with pulses below <400 fs and an M² < 1.2. This laser has been specifically designed for demanding medical implantable device and electronics manufacturing as well as high peak power optogenetics applications.
The JDL Series of unmounted laser diode bars are available in CW or QCW configurations in wavelength from 760nm – 1064nm. Various emitter configurations and cavity lengths are available offering up to 200W CW and 500W QCW output powers.
The Jenlas Fiber ns series of nanosecond pulsed fiber lasers at 1085nm are available with up to 105W, 190 to 250 nanoseconds pulse widths, and peak pulse powers of up to 8 kilowatts. for precise material processing and cutting applications.
The JOLD-FC Series of high quality high power fiber coupled laser diode bar products are offered in wavelengths from 780nm – 1064nm and 30W to 400W output power.
We offer standard wavelengths of 808 nm, 940 nm and 980 nm. The fiber core diameter of our diode lasers is 200 µm, 400 µm or 600 µm. On request, we will be happy to adapt the parameters to your individual requirements. You can also choose between pilot lasers, monitor diodes and integrated Peltier elements.
The RPK Series of multiple single emitter fiber coupled diode lasers are available in wavelengths from 405nm thru 1550nm with up to 300W output powers. These multi-emitter high power and high brightness diode lasers include options for aiming beam, photo detector, TEC, fiber detector, thermistor and a variety of package types.
The RWLP series of fiber coupled laser diodes are variable in both multimode and single mode configurations, with wavelengths from 405nm thru the IR. The highly reliable RWLP series is suitable for a variety of applications such as biological and analytical instrumentation.
The SOL Series is the most compact Q-switched Diode Pumped Solid State laser available in the power range from 6W to 40W @ 1064nm. Sol versions @ 532nn are also available with the same footprint. These air-cooled DPSS lasers are offered in a rugged and lightweight Single Unit, designed to allow easy and reliable integration in micro-machining and marking applications. Compactness, insensitivity to environmental conditions and ease of handling guarantee superior operation flexibility and performance/cost ratio.
The VD Series of Vertical Cavity, Surface Emitting Laser (VCSEL) emitters, and arrays are available in a wide range of output powers in wavelengths of 850nm and 940nm. Standard options include VCSEL, VCSEL w/ Diffusor, VCSEL & PD w/ Diffusor, and pulsed VCSELs. These low-cost lasers are ideal for a wide range of consumer products.
The Vento Series of sub-ns DPSS active Q-Switched lasers produce pulses in the hundreds of ps range with average power up to 50 W @ 532 nm and up to 100 W @ 1064 nm. Ideal for micromachining, fine cutting and precision LIDAR, all the models are enclosed in an extremely compact and ruggedized single unit with both air-cooled and water-cooled options available.
Deals
