500uJ Lasers

Unlike continuous wave lasers, the output of these 500uJ pulsed lasers cannot be specified by their output power alone. This is because the output power of a pulsed laser is determined by three different parameters, the laser’s pulse width, pulse energy, and pulse repetition rate.

On this page, we have a list of all of the 500uJ lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Manufacturer

Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
R0Z2-Image-Compact-Efficient-UV-Laser CEUV Series Pulsed DPSS Lasers 266, 355, 532, 1064 5.0, 10.0, 20.0 500.0, 1000.0, 2000.0 3ns 10kHz to 1MHz Active
neoMOS neoMOS Pulsed DPSS Lasers 1064 5.0, 15.0, 50.0, 75.0, 100.0 250.0, 400.0, 500.0 600fs, 700fs, 900fs, 10ps, 40ps, 70ps, 100ps
neoYb neoYb DPSS Amplifiers 1030 100.0 50.0, 500.0 700fs, CW
Quantas-Q1-211: High energy, compact, nanosecond, DPSS laser Quantas-Q1-211 Pulsed DPSS Lasers 211 0.005, 0.008, 0.010, 0.014, 0.024, 0.025 100.0, 200.0, 400.0, 500.0, 700.0, 1000.0, 1200.0, 2500.0 10ns Single Shot to 10Hz, Single Shot to 20Hz, Single Shot to 50Hz Active
Quantas-Q1-213: High energy, compact, nanosecond, DPSS laser Quantas-Q1-213 Pulsed DPSS Lasers 213 0.005, 0.008, 0.010, 0.014, 0.020, 0.024, 0.025 100.0, 200.0, 400.0, 500.0, 700.0, 1000.0, 1200.0, 2000.0 10ns Single Shot to 10Hz, Single Shot to 20Hz, Single Shot to 50Hz Active
Quantas-Q2-211: High energy, compact, nanosecond, DPSS laser Quantas-Q2-211 Pulsed DPSS Lasers 211 0.035, 0.060, 0.080, 0.120 20.0, 500.0, 1000.0, 1800.0, 2500.0, 3000.0, 5000.0 5ns, 6ns, 7ns, 8ns 10Hz, 20Hz, 33.3Hz, 50Hz Active
Quantas-Q2-213: High energy, compact, nanosecond, DPSS laser Quantas-Q2-213 Pulsed DPSS Lasers 213 0.060, 0.075, 0.080, 0.120, 0.150 20.0, 500.0, 1000.0, 1800.0, 2500.0, 3000.0, 5000.0 5ns, 6ns, 7ns, 8ns, 10ns 10Hz, 20Hz, 33.3Hz, 50Hz, 100Hz, 200Hz Active
Quantas-Q2-527: High energy, compact, nanosecond, DPSS laser Quantas-Q2-527 Pulsed DPSS Lasers 527 0.350, 0.800, 1.0, 2.0 500.0, 5000.0, 15000.0, 25000.0, 30000.0, 35000.0, 40000.0 5ns, 6ns, 7ns, 8ns 10Hz, 20Hz, 33.3Hz, 50Hz Active
Quantas Q2 QLI Quantas-Q2-532 Pulsed DPSS Lasers 532 0.500, 0.750, 0.800, 1.0, 2.0 500.0, 5000.0, 25000.0, 30000.0, 35000.0, 40000.0 5ns, 6ns, 7ns, 8ns, 10ns 10Hz, 20Hz, 33.3Hz, 50Hz, 100Hz, 200Hz Active
Wedge-B-266 Wedge-HB/XB 266 Pulsed DPSS Lasers 266 0.300, 0.500 150.0, 500.0 1.5ns, 1.8ns Single shot to 2kHz Active

CEUV Series

R0Z2-Image-Compact-Efficient-UV-LaserAreté has developed a commercial series of compact and efficient DPSS laser sources, capable of operating over a wide range of pulsing conditions (duty-cycle and PRF), in a low SWaP package, with average power up to ≈5W @ 266nm, 10W @ 355nm or 532nm, 20W @ 1064nm, suitable for airborne applications. The design has been tested in brassboard hardware and a prototype is being developed.

Q1 Series

Quantas-Q1-211: High energy, compact, nanosecond, DPSS laser

The Q1 series is a compact, energy-efficient, diode pumped, air-cooled, Q-switched laser available at 1064 and 1053nm with up to 45 mJ of pulse energy and rep rates up to 50Hz. The high peak powers and low divergence of the Q1 series enable efficient harmonic conversion through the 5th harmonic (213 or 211nm). The innovative laser design has resulted in a user-friendly, turnkey system that requires little maintenance.

Q2 Series

Quantas Q2 QLI

The Q2 series is a versatile, diode pumped, air-cooled, Q-switched laser capable of achieving up to 80mJ of pulse energy with an operational rep rate up to 100Hz. Available at the fundamental wavelengths of 1064 and 1053nm, the innovative water-free laser crystal end-pumping technology produces Gaussian-like, low divergence laser beams with high peak powers, enabling efficient harmonics conversion through the 5th harmonic.

Wedge Series

Wedge-XF-1064: 1064nm Picosecond Laser

The Wedge series of DPSS Lasers have been designed for OEM applications like micro machining of hard and soft materials, specialty marking, glass and crystals engraving, LIDAR, LIBS, Spectroscopy and medical diagnostics. High peak powers, with relatively low energy and heat generation, allows efficient ablation and non-linear interaction with most materials. The compact and lightweight package represents a great benefit in LIDAR and other aerospace applications, while short pulses give extremely precise time-of-flight measurements.
Second Harmonic (532 nm output) and wavelength conversion option widen the product application range.